Idiomas disponibles
Idiomas disponibles
SAFETY WARNINGS
Injury may occur from the pressure washer.
Always hold on firmly to the gun/lance assembly when starting and oper-
ating the unit. Failure to do so can cause the lance to fall and whip danger-
ously.
Know how to stop the pressure washer and bleed pressures quickly. Be
thoroughly familiar with controls.
Follow the maintence instructions specified in the manual.
Do not leave pressurized unit unattended. Shut off the pressure washer and
release trapped pressure before leaving.
Do not operate the unit if you see any fuel, oil or water leaks from the
machine. Do not resume operation until the unit has been inspected and
repaired by a qualified service person.
Never run the unit with the governor disconnected or operate at excessive
speeds.
Place unit in a clean, dry, flat area for servicing. Before servicing the unit:
turn the unit off, relieve the water pressure from the trigger gun, and allow
the unit to cool down. Service in clean, dry, flat area. If applicable, block
wheels to prevent unit from moving.
Do not move the unit by pulling on the hose.
HDC-SERIES Operator's Manual
7
