Playing Back
To start operations while the
cassette holder is open
Operations may be started while the
cassette holder is open. For example, when
the B™ button is pressed while the cassette
holder is open, the cassette holder will
close and playback will start. Similarly,
pressing the <4, PP , or Il buttons while
the cassette holder is open will close the
cassette holder and start the respective
operation.
To change to recording mode
during playback
Keeping the B® button pressed, press the
@ button. The unit immediately switches
from playback to recording without stopping
the tape. This is useful when editing
previously recorded material.
For headphone listening
Connect the headphone plug to the
HEADPHONES jack. The listening level can
be controlled with the PHONE LEVEL
control.
Is it necessary to set the MONITOR
button for playback?
No. The TAPE mode is automatically
selected and TAPE is displayed.
What is the Dolby NR system?
The Dolby NR (noise reduction) system
reduces tape hiss noise in low-level, high-
frequency signals by boosting the signals
during recording and lowering them during
playback.
The Dolby S NR system provides the
highest reduction in tape hiss noise in both
low and high frequencies.
Note
The Dolby HX PRO system is effective only
during recording, not during playback.
