Idiomas disponibles
Idiomas disponibles
OPENING DIRECTION SETTING (L4)
This setting is for users to change the gate opening direction without exchanging
the motor wires, but have to note the limit stop position.
Operation instruction:
• Press and hold "PROG" button for 3 sec. to enter into basic menu. The
indicator light L0 will flicker once, then L1 will be steady on.
• Press "PROG" button again for 3 sec. to enter into advanced menu. L0 will
flicker twice, then L1 will be steady on.
• Press "+" button three times to select opening direction option. The indicator
light L4 will be steady on.
• Press "SET" button once to enter into opening direction setting. The indicator
light L1 will indicate the current setting. (Default is L1 on).
• Press "+" or "-" button to set the opening direction. The indicator light L1 on or
off stands for the 2 directions. (L1 on: open to right-hand; L1 off: open to left-
hand) Press "SET" button once to save and system will automatically exit. The
EN
- Flicker
Cancel
start-up
delay function
Delay for 0.5 sec.
Delay for 1 sec.
Delay for 1.5 sec.
