Idiomas disponibles
Idiomas disponibles
• Press and hold "PROG" button for 3 sec. to enter into basic menu. The
indicator light L0 will flicker once, then L1 will be steady on.
• Press "+" button three times to select slow stop distance option. The indicator
light L4 will be steady on.
• Press "SET" button once to enter into slow stop distance setting. The indicator
lights L1-L5 will show the current distance of slow stop. (The default is L4).
• Press "+" or "-" button to set the slow stop distance. The indicator lights L1-L5
will show the different slow stop distance. The more the indicator lights are on,
the longer the distance will be. If the gate is heavy(over 800 kg), it is
recommended to set it on L4 or L5 to have a better slow stop running. If the
gate weight is less than 500 kg, it is recommended to set it on L2 or L1 to have
a better slow stop running.
• Press "SET" button once to save and system will automatically exit. The
indicator lights L1-L5 will be on in sequence, then all will flicker once and go
off.
AUTO-CLOSE FUNCTION SETTING (L5)
When the gate is completely open, the control board will send the auto-close
signal to enable the gate to close automatically according to the pre-set auto-close
time.
Operation instruction:
EN
