Idiomas disponibles
Idiomas disponibles
MANUAL RELEASE CHECK
Insert the key and open the manual release bar to enable the motor get into
manual mode and check that the motor output gear rotates freely by hand:
Remove the lock cover.
•
Insert the key into the lock and turn it open.
•
•
Open the manual release bar till 90
•
In manual mode the gear should turn freely and the gate can be operated by
hand.
REMOVING/INSTALLING MOTOR COVER
Unscrew the two cover screws located at each side of the motor cover and remove
it from the top:
MOTOR BASE FIXING
•
Pre-embed the anchor bolts according to holes in motor base before
concerting (see picture below):
EN
o
.
