Idiomas disponibles
Idiomas disponibles
• Simultaneously press and hold the third and the fourth buttons of the paired
remote control for 6 sec. The alarm lamp will flash, which indicates that the
learning function of the control board is on working.
• Press the button to be learned on the remote control under the above status.
The alarm lamp will be off. Then remote control learning is complete.
• The system will automatically exit the learning mode after pairing finished.
NOTE: The remote control working mode will be copied from original one to new
paired one.
BASIC MENU SETTING
a) Standby mode
b) Running speed setting
c)
Slow stop speed setting
d) Auto-reverse when meeting obstacle setting
e) Slow stop distance setting
f)
Auto-close function setting
Operation instruction:
• Under standby mode, press and hold "PROG" button for 3 sec., the indicator
light L0 will flicker once and enter into basic menu setting.
• Press "+" or "-" button to select the different function settings.
• Press "SET" button to enter into the selected function setting.
RUNNING SPEED SETTING (L1)
User can adjust the gate opening and closing speed according to the actual
installation and using condition.
Operation instruction:
EN
