Idiomas disponibles
Idiomas disponibles
• Press" SET" button once to save and system will automatically exit. The
indicator lights L1-L5 will be on in sequence, then all will flicker once and go
off.
ACCELERATION SETTING (L2)
Due to the different installation environment and gate installation status, users
can adjust the acceleration of starting and deceleration of buffering of the gate
opener to their necessary.
Operation instruction:
• Press and hold "PROG" button for 3 sec. to enter into basic menu. The
indicator light L0 will flicker once, then L1 will be steady on.
• Press "PROG" button again for 3 sec. to enter into advanced menu. The
indicator light L0 will flicker twice, then L1 will be steady on.
• Press "+" button once to select acceleration option. The indicator light L2 will
be steady on.
• Press "SET" button once to enter into acceleration setting. The indicator lights
L1-L5 will show the current acceleration value. (The default is L2).
• Press "+" or "-" button to set the acceleration value. The indicator lights L1-L5
will indicate the different acceleration values. The more the indicator lights will
be on, the faster the speed changes.
• Press" SET" button once to save and system will automatically exit. The
indicator lights L1-L5 will be on in sequence, then all will flicker once and go
off.
START-UP DELAY SETTING (L3)
This product control board is with low power consumption function under standby
mode. When the gate opener stopped working, the control board will
automatically enter into low power consumption mode to reduce the power
consumption and extend the using time of the battery. Meanwhile, in order to
EN
