Idiomas disponibles
Idiomas disponibles
MN007272A01-AC
Chapter 1: IMPRES 2 Batteries and Chargers
Chapter 1
IMPRES 2 Batteries and Chargers
™
The IMPRES
energy solution is an advanced energy system developed by Motorola Solutions.
The system includes the followings:
●
IMPRES 2 battery
●
IMPRES 2 adaptive charger
Charger Specification
●
Input: 14 V
1 A
Features and Benefits
Charging IMPRES 2 batteries using an IMPRES 2 Adaptive Charger yields the following benefits:
●
Maximize the battery life by significantly reducing heat during the trickle and post-charge cycles.
●
Determines the current battery status and giving an indication of the effective use time.
●
Provide higher-rate IMPRES 2 Lithium-Ion battery charging.
●
Minimizes the IMPRES 2 battery heating, regardless of how long the battery is left in the charger pocket.
●
Periodically charges a battery stored in the charger to maintain a high state of readiness.
●
Eliminates Nickel battery memory effect, eliminating the need to purchase special equipment, or train
personnel in tasks to maintain battery life cycle.
Using this unique patented system, there is no requirement to track and record IMPRES 2 battery or remove
batteries from chargers after charging completion.
1.1
Charging Radios and Batteries
The IMPRES 2 Adaptive Charger System is a fully automated system. The charger pockets accommodate
either a radio with an attached Motorola Solutions-approved battery, or a Motorola Solutions-approved battery
alone. Batteries charge best at room temperature.
Prerequisites: To ensure optimized charging performance, turn off the radio while charging unless the radio
is transmitting data wirelessly on Wi-Fi or Bluetooth.
Procedure:
1. Plug the charger end of the power supply cord into the DC inlet (1) at the back of the charger.
8
