Idiomas disponibles
Idiomas disponibles
Table of contents
1
Introduction ........................................................
2
Product description (fig. 1 - 8) ............................
3
Scope of delivery (Fig. 1) ...................................
4
Proper use..........................................................
5
Safety instructions..............................................
6
Technical data....................................................
7
Unpacking ..........................................................
8
Assembly............................................................
9
Operation ...........................................................
10 Working instructions...........................................
11 Cleaning and maintenance ................................
12 Transport and storage........................................
13 Repair & ordering spare parts ............................
14 Disposal and recycling .......................................
15 Troubleshooting .................................................
16 Warranty conditions - Scheppach 20V IXES se-
ries .....................................................................
17 EU Declaration of Conformity.............................
18 Exploded view .................................................... 230
Explanation of the symbols on the
product
Symbols are used in this manual to draw your attention to
potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warn-
ings themselves will not rectify a hazard and cannot re-
place proper accident prevention measures.
Before commissioning, read and observe
the operating manual and safety instruc-
tions!
Attention! Failure to observe the safety signs
and warning information affixed to the prod-
uct and failure to observe the safety and op-
erating manual can result in serious injury or
even death.
Wear safety goggles.
Wear hearing protection.
Wear safety gloves!
Wear sturdy footwear!
Keep hands and feet away from the rotating
parts of the tool
15
16
16
16
16
18
18
18
19
20
21
21
21
22
22
23
24
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised spe-
cialists
• Installing and replacing non-original spare parts
www.scheppach.com
Make sure that other persons maintain a
sufficient safety distance.
Do not expose the product to rain. The prod-
uct may only be stationed, stored and oper-
ated in dry ambient conditions.
Only carry out maintenance, modification,
adjustment and cleaning work when the mo-
tor is switched off and the battery is re-
moved.
Danger due to parts flying off while the en-
gine is running.
Open
Locked
Thread thickness / cutting circle
Angle setting
Guaranteed sound power level of the prod-
uct.
Lithium-ion battery
The product complies with the applicable
European directives.
GB | 15
