Metal Processing; Intended Use; Technical Data - Festool VECTURO OS 400 EQ Manual De Instrucciones

construction activities contains chemicals known
(to the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically treated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
Oscillator designed for
– cutting wood (max. 78 mm), plastic, glass-fibre
reinforced plastic (GRP), plasterboard and non-
ferrous metals (max. 1 mm),
– Scraping away carpet residues and cutting elas-
tic sealant,
– in a weatherproof environment,
– with tools and accessories manufactured by Fes-
tool.
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
When processing metal, the following mea-
sures must be taken for safety reasons:
– Install an upstream residual-current circuit
breaker (FIG, PRCD).
– Regularly remove dust deposits from the motor
housing.
Wear protective goggles.

Intended use

Not suitable for removing windows from passenger
cars, trucks and buses or renovating concrete
joints and for sanding.
The user is liable for improper or non-in-
tended use.

Technical data

Oscillator
Power consumption
Power output
Nominal oscillation rate
Oscillation angle
Weight
Safety class
WARNING

Metal processing

10000 - 18500 min
OS 400 EQ
400 W
220 W
-1
2,0°
1,55 kg
/II
9