Angelo Po 08WFA2PG Manual De Uso página 172

ENGLISH
To carry out this operation, proceed as follows.
Turn off the gas supply tap 1)
Pull off the knob (A).
2)
Undo the screws (C) and remove the control
3)
panels (B).
Unscrew the nozzle (D) and replace it with
4)
the one suitable for the type of gas in use (see
table at back of manual).
Replace the control panels (B) and the knobs
5)
(A) on completion of the operation.
To carry out this operation, proceed as follows.
Turn off the gas supply tap
1)
Undo the screws (B) and remove the control
2)
panel (A).
Unscrew the nozzle (C) and replace it with
3)
the one suitable for the type of gas in use (see
table at back of manual).
Replace the control panel.
4)
REPLACING THE PLATE BURNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as follows.
Turn off the gas supply tap
1)
Pull off the knobs (A).
2)
Undo the screws (C) and remove the control
3)
panel (B).
Remove the pipe (D).
4)
Remove the nozzle (E) and replace it with the
5)
one suitable for the type of gas in use (see
table at back of manual).
Retighten the pipe (D).
6)
Replace the pipe (D), the control panels (B)
7)
and the control knobs (A).
18
REPLACING THE TOP BURNER NOZZLE (10 KW)
REPLACING THE OVEN BURNER NOZZLE
PART REPLACEMENT
3329590_inst_GB_rev.2