Adjustments; Replacing Parts - Angelo Po 1G1PE1E Manual De Uso

TESTING OF THE APPLIANCE
Important
Before it is put into service, the system
must be tested to check the operating con-
ditions of every single component and
identify any malfunctions. In this stage, it is
important to check that all health and safety
requirements have been complied with in
full.
To test the system, make the following checks.
ADJUSTMENTS PROCEDURE
The appliance's main functions do not require
any special adjustments by specialist staff ex-
cept the settings made during use by the user.
REPLACE PROCEDURE
IT
The appliance does not require the replacement of
operating components by specialist staff except the
GB
replacement of standard parts which can be carried
out by the user.
DE
FR
DECOMMISSIONING THE APPLIANCE
ES
Important
This operation must be carried out by
skilled operatives in compliance with the le-
gal requirements with regard to safety at
work. Never dump non-biodegradable ma-
terials, lubricating oils and non-metallic
components (rubber, PVC, resins, etc.) in
the environment. Dispose of them in ac-
cordance with the relevant legal require-
ments.
English

ADJUSTMENTS

REPLACING PARTS

- 18 -
1 - Check that the mains voltage is the same as
that of the appliance.
2 - Operate the appliance's circuit-breaker to
check the electrical connection.
3 - Check that the safety device is operating cor-
rectly.
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into oper-
ation in conditions of safety, in accordance with le-
gal requirements.
8
9