Idiomas disponibles
Idiomas disponibles
ENGLISH
Problem
Possible causes
Fuse has blown or
circuit breaker has
The
been tripped.
dishwasher
The power supply
does not
is not on.
work
Water pressure is
too low.
Drainage
Overflow.
pump does
not stop
Some sounds are
normal.
Utensils are
Noise
not secure in
the baskets or
something small
has fallen out of a
basket.
Engine humming.
There
Unsuitable
is foam
detergent.
inside the
dishwasher
Spilled rinse aid.
The interior
Detergent with
is stained
colouring agent
was used.
BOLERO AGUAZERO 4201 E _4201 INOX E
94
Possible solution
Replace the fuse or reset the circuit breaker in the main
switchboard of your home. Remove any other device
sharing the same circuit as the dishwasher.
Make sure the dishwasher is on and door is properly
closed. Make sure that the power cord is plugged into
the socket properly.
Check that the water supply is connected properly and
that the water is turned on.
The system is designed to detect an overflow. When it
detects this, it switches off the circulation pump and
switches on the drain pump.
Sound of detergent dispenser opening.
Make sure that everything is securely fastened in the
dishwasher.
The dishwasher has not been used regularly. If you
do not use it often, remember to schedule it to fill and
empty every week, which will help keep the gasket
moist.
Use only detergent special for dishwashers to prevent
foam formation. If there is foam forming, open the
dishwasher and let it evaporate. Add 4 litres of cold
water inside. Close and lock the dishwasher, then start
the pre-rinse wash cycle to drain the water. Repeat the
process if necessary.
Always clean spilled rinse aid immediately.
Be sure to use dye-free detergents.
