Idiomas disponibles
Idiomas disponibles
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
Dishwasher
-
Water inlet hose
-
Drain hose
-
Funnel (according to the model)
-
Instruction manual
-
3. OPERATION
Before using your dishwasher for the first time:
Set the water softener.
-
Add salt into the water softener.
-
Refill the rinse aid dispenser.
-
Refill the detergent.
-
1. Setting the water softener
The water softener is designed to remove minerals and salts from the water, which would
have a detrimental or adverse effect on the operation of the appliance. The higher the
content of these minerals and salts, the harder the water is. The softener should be adjusted
according to the hardness of the water in your area. Your local water supply company can
advise you on the water hardness in your area.
Settings
The amount of salt dispensed can be set from H0 to H7. Salt is not required in the set
-
value H0.
Find out about the hardness value of your tap water. Your water supply company will help
-
you with this.
The pre-set value can be found in the water hardness table.
-
BOLERO AGUAZERO 4201 E _4201 INOX E
ENGLISH
73
