Idiomas disponibles
Idiomas disponibles
Filling/venting
Use
to fill the tires to the road pressure.
Use
to vent the tires to the field pressure.
The selected target tire pressure is displayed next to the
corresponding symbol on the left edge of the screen. The
arrows pointing to the right (four arrows) indicate that
an adjustment process is active.
To cancel the adjustment, press the
time! When the arrows disappear and "OK" appears in
the top row between "Set" and "Tire", the adjustment
process is complete.
Temporarily changing the target tire pressure
If, during or after the adjustment, you notice that the
driving conditions are changing, you can adjust the tire
pressures on all selected axles via the
buttons in increments of 0.1 bar/1 psi per button press,
without changing the stored pressures.
Error messages
If an error is detected while the central tire inflation sys-
tem is in operation, the system stops the current process
automatically, an error message appears on the display
and an acoustic warning sounds. The error message is
displayed as one letter followed by a two-digit number.
To acknowledge the error, press the
in the image)! However, the affected axle remains exclud-
ed from the adjustment.
20
button at any
and
button (as shown
Adjustment process in progress
Adjustment process complete
Tire pressure is being adjusted using the
Tire pressure is being adjusted using the
Error message
button
button
