PTG RDS/control Manual De Instrucciones página 16

For adjusting the target
values, the unit of
measurement and frost
mode
Assignment of the
display lines to the
individual axles
Cancel the adjustment
process at any time
Fill selected axles to the
stored road value
Change the target
values in increments of
0.1 bar/1 psi per button
press
Press both buttons
Vent selected axles to
simultaneously to check
the stored field value
the tire pressures
Select or deselect axles
– +
When connecting, you must
pay attention to the catch
Display
on the connector!
brightness
On/off
The black toggle switch of the operating
console acts as the main switch for the power
supply of the central tire inflation system and is
usually in the ON position.
16