PTG RDS/control Manual De Instrucciones página 18

Idiomas disponibles

Defining the target tire pressure

To change the stored target tire pressures, press and hold

the

button in the top right corner of the oper-

ating console throughout the setting process.

Now use the

and press the

road pressure. The selection is displayed via the LEDs on

the buttons. In addition, the selected axle is shown on the

display and the selection of field or road pressure is marked

with a dot. You can now use the

tons to increase or decrease the target value by 0.1 bar/1

psi per button press until the desired value is reached.

Once you have used the described method to set the de-

sired values for all axles, store the values by releasing the

button. The successful storing of the changed

settings is shown on the display.

To quickly check all stored pressures, use the

buttons to deselect all axles. The display then shows

the start overview of all stored target tire pressures.

After an axle is deselected, an exclamation point appears

for approx. 2 seconds; while the exclamation point is dis-

played, the axle cannot be reselected.

buttons to select an axle,

button to set the field or

and

but-

Changing the road target tire pressure

Changing the field target tire pressure

Target tire pressures stored

Start screen

An axle has been deselected