Idiomas disponibles
Idiomas disponibles
Downloaded by: pd-oliana on 07-03-2023 10:52 CET
Cleaning And Maintenance Of The Oven's Front Door Glass
Remove the profile by pressing the plastic latches on both left and right
sides as shown in figure 23 and pulling the profile towards yourself as
shown in figure 24. Then remove the inner-glass as shown in figure 25.
If required, middle glass can be removed in the same way. After cleaning
and maintenance are done, remount the glasses and the profile in re-
verse order. Make sure the profile is properly seated in its place.
Figure 23
Rack Positions
Rack 4
Rack 3
Rack 2
Rack 1
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure,
first remove the lower, and than the upper side from installation location.
To install wire racks; reverse the procedure for removing wire rack.
Changing The Oven Lamp
WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is
cold.
Remove the glass protection by turning as indicated in the figure. If
you have difficulty in turning, then using plastic gloves will help you in
Figure 24
It is important to place the wire grill into
the oven properly. Do not allow wire rack
to touch rear wall of the oven. Rack posi-
tions are shown in the next figure. You may
place a deep tray or a standard tray in the
lower and upper wire racks.
2
1
Figure 25
