Idiomas disponibles
Idiomas disponibles
Downloaded by: pd-oliana on 07-03-2023 10:52 CET
uct without grounding according to local regulations.
3. The circuit breaker switches of the oven shall be
placed so that end user can reach them when the oven
is installed.
4. The power supply cord (the cord with plug) shall
not contact the hot parts of the appliance.
5. If the power supply cord (the cord with plug) is dam-
aged, this cord shall be replaced by the manufacturer or
its service agent or an equally qualified personnel to
prevent a hazardous situation.
6. Never wash the product by spraying or pouring wa-
ter on it! There is a risk of electrocution.
7. WARNING: To avoid electric shock, ensure
that the device circuit is open before changing the
lamp.
8. WARNING: Cut off all supply circuit connections
before accessing the terminals.
9. WARNING: If the surface is cracked, turn off the
appliance to avoid risk of electric shock.
10. Do not use cut or damaged cords or extension
cords other than the original cord.
11. Make sure that there is no liquid or humidity in the
outlet where the product plug is installed.
12. The rear surface of the oven also heats up when
the oven is operated. Electrical connections shall not
touch the rear surface, otherwise the connections may
be damaged.
13. Do not tighten the connecting cables to the oven
