Thermador Professional PRO-GRAND PRD30 Manual De Instalación página 22

Griddle Tilt Adjustment (Not on all models) screws under the back of the griddle plate. Start with one
half turn counter-clockwise (CCW) of the screws. Further
adjustment should be made by one-quarter turn until water
Check the griddle adjustment by pouring two tablespoons
g yp g P slowly flows into the grease tray.
of water on the back of the griddle plate. The water should
slowly roll into the grease tray. If not, adjust the two (2)
adjacent cabinet. This may damage the cabinet and
countertop due to excessive temperatures.
(} CAUTION: DO NOT operate range if sides are lower than the
ied ae
CORRECT! — Leveling legs should be adjusted so that the range
sides are at the same or higher level as the adjacent cabinet.
\ SSeS ss p
O00 ? C000
CABINET RANGE CABINET
Pic Pac
a: a:
x i
Each Leveling Leg can be adjusted using a 3/8" socket or wrench
on the top of the leg, or using an adjustable wrench on the flats on
the sides of the foot.
Figure 15: Adjusting the Height of the Range
English 20