GE JVM1665 Instrucciones De Instalación página 20

Installation Instructions
ADAPTING BLOWER
FOR RECIRCULATION
NOTE:The exhaust Adapter with damper is not
needed for recirculating models. You mag want
to save them for possible future use.
[] Remove and save screws that hold blower plate
and blower unit to the oven.
BlowerPlate Screws
_-----------_ ,_ Blower P late
, i
___ Back of Oven
---- BlowerMotor Screw
[_ Slide the blower plate from under its retaining
flange and lift it off.
Retaining
_r_ BlowerPlate
[_ Carefullg pull out the blower unit. The wires
will extend far enough to allow gou to adjust
the blower unit.
r
[_ Roll the blower unit 90° so that fan blade openings
are facing toward the front of the oven.
Roll 4_
2O