GE JVM1665 Instrucciones De Instalación página 18

Installation Instructions
| MOUNT THE OVEN
_f J
FOR EASIERINSTALLATION AND PERSONAL SAFETY, W E
RECOMMEND THATTWO PEOPLEINSTALLTHIS OVEN.
IMPORTANT: DO not grip or use handle
during
installation.
NOTE:If your cabinet is metal, use the nglon grommet
around the power cord hole to prevent cutting
of the cord.
NOTE:We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
INPORTANT: If filler blocks are not used,
case damage mall occur from over
tightening screws.
NOTE:When mounting
the oven, thread power
cord through hole in
bottom of top cabinet.
Keep it tight throughout
Steps 1-]. Do not pinch
cord or lift oven bu
pulling cord. _'-._,_
[_ Rotate front of oven up
against cabinet bottom.
[] Lift oven, tilt it
forward and hook
slots at back bottom
edge onto two lower
tabs of mounting plate.
CabinetFront
CabinetBottomShelf
Filler Block
-_Equivalent
to Depth
of Cabinet
Recess
"_-- Self-AligningScrew
Oven
Top
[_ Attach the oven to the top cabinet by inserting
] self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush
to bottom of cabinet.
[] Tighten the three screws to the top
of the oven completelu. (While tightening
screws, hold the oven in place against the wall
and the top cabinet.)
$
[_ Install grease filters. See the Owner's Manual
packed with the oven.
18