GE JVM1665 Instrucciones De Instalación página 15

Installation Instructions
[- OUTSIDE BACK EXHAUST
{Horizontal Duct)
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Attach Exhaust Adapter
to Wall Plate
B3. Attach Mounting Plate
to Wall
B4. Prepare Top Cabinet
B5. Adjust Blower
B6. Mount the Oven
I-_ PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
[] Read the instructions on the REARWALL TEMPLATE.
[_ Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the wall plate.
[_ Cut the opening, following the instructions of the REAR
WALL TEMPLATE.
ATTACH THE EXHAUST ADAPTER
TO THE OVEN REAR PANEL
[]Unscrew and remove the exhaust adapter assemblg
from the top of the oven.
T
Exhaust
Adapter
[_ Attach . .... t he exhaust adapter to the oven rear panel
by shdmg it into the guides at the top center
of the back of the oven.
Exhaust Adapter _ _ __ Damper
Jlo _ Tabs
Push in securelg until it is in the lower locking tabs.
Take care to assure the damper hinge is installed so
that it is at the top and that the damper swings freely.
15