GE JVM1665 Instrucciones De Instalación página 10

Installation instructions
ALIGNING THE WALL PLATE
ix
\,
\A _
Hole
\\\
\
\
?-
Hole
C _
CAUTION: Wear gloves to
avoid cutting fingers on
sharp edges.
I
ri_-: . i[i r:
fP i _:l
I i . ii[
,,j .
uraw a veRIcal
ii
' ! LineonWall
I_ fromCenter o f '_.
i I TopCabinet ii'
i i i
. I [
I I i
L......................... •..................... t_=_i
[ 7 ]i
o o o
#, 4
AreaE I
i
/
--_ HoleB
/
HoleD
NOTE:Appearance and
shape of the mounting
plate mag varg from gour
model.
[] Draw a vertical line on the wall at the center of the 30"
wide space.
[_3 Use the mounting plate as the template for the rear
wall. Place the mounting plate on the wall, making
sure that the tabs are touching the bottom of the
cabinet or the level line drawn in Step C for cabinets
with front overhang. Line up the notch and center line
on the mounting plate to the center line on the wall.
[_3 While holding the mounting plate with one hand,
draw circles on the wall at holes A, B,C and D (see
illustration above/actual plate marked with arrows).
Four holes must be used for mounting.
NOTE:Holes C and D are inside area E.If neither C nor D
is in a stud, find a stud somewhere in area E and draw a
fifth circle to line up with the stud. It is important to use
at least one wood screw mounted firmly in a stud
to support the weight of the oven.
Set the mounting plate aside.
[_ Drill holes on the circles. If there is a stud, drill a s/16" hole
for wood screws. For holes that don't line up with a stud,
drill a %" hole for toggle bolts.
NOTE:DO NOT MOUNT THE PLATEATTHISTIME.
10