Idiomas disponibles
Idiomas disponibles
Language
The language is selected with the set-up wizard.
From here, it is possible to change the language
by choosing Language and then selecting the
desired language. Accept the selection with Yes,
or reject it with No.
Screen
Screen brightness can be adjusted from Screen.
To increase or decrease the brightness of the
screen, use the arrow buttons. Accept with OK, or
reject by selecting Cancel.
Volume
Sound volume can be adjusted from Volume.
Adjust the keypad tone volume and the alert tone
volume by using the arrow buttons. Accept the se-
lection with OK, or reject it with Cancel.
Power-save operation
The time after which QuikRead go Instrument clos-
es the lid – without entering sleep mode – can be
adjusted from Power save → Close lid only; adjust
the delay value with the arrow buttons. The instru-
ment will close the lid if it hasn't been used for the
amount of time specified, without entering sleep
mode (activating the hibernation function). This
mode does not disrupt any LIS/HIS connection.
The time after which QuikRead go Instrument
enters sleep mode can be adjusted from Power
save → Full standby; adjust the delay value with
the arrow buttons. The instrument goes from idle
mode into sleep mode if it hasn't been used for
the amount of time indicated. Entering sleep mode
breaks any active LIS/HIS connection.
Accept the settings with OK, or reject with Cancel.
20
PRINCIPLES OF OPERATION
Saving changes to personal settings
After all desired adjustments to personal settings
have been made, choose Save.
Saving setting to profiles for further use
From the main menu screen, choose Profiles.
Choose Save as profile, and select either use of a
new profile or a profile you'd like to copy and then
modify. Supply a name for the profile, and accept
with OK.
Measurement flow
With the measurement flow settings, the opera-
tor can adjust laboratory- or work-routine-oriented
settings such as operator and patient IDs, printing,
LIS transfer, and some test-specific parameters
(see Image 17).
Image 17
Measurement flow menu
These settings can be selected for temporary use
(use until power-down) with Save after you make
the desired changes.
For further use, the settings need to be saved to a
profile. Settings for continuous use should be con-
figured with the set-up wizard: Settings → Mea-
surement flow → Maintenance → Basic settings.
Operator ID
... is an identifier of the user.
•
Operator ID OFF: The instrument does not re-
quest an Operator ID.
•
Operator ID ON: An Operator ID has to be giv-
en before every sample measurement. That
ID is paired with the test result.
•
Operator ID ON + Propose previous: The in-
PROFILE
Settings
Operator ID:
Patient ID:
Test
parameters
...
OFF
OFF
ON
ON
QC
...
Propose
previous
Cancel
Maintenance
10:30
MEASUREMENT FLOW
Printing:
LIS transfer:
OFF
OFF
ON
ON
Automatic
Automatic
Save
