Figure 33 Adding coolant
[Storage of Coolant]
1. When the coolant is not in use, it should be stored in a special sealed container.
2. It should be placed in a cool and dry place. The coolant is a toxic liquid and must be kept away from children.
3. Note that the coolant should be strictly prevented from being contaminated by petroleum products, and it is not
allowed to mix or store two different brands of coolant.
Danger:
1. Ethylene glycol antifreeze is an organic solvent, which is toxic and corrosive. Do not spill on the surface of rubber
products and painted parts during use, let alone contact with human skin. If accidentally splashed on the surface of
rubber products, painted parts or human body, immediately rinse with water.
2. When servicing the engine, if you need to loosen the cylinder nut, please drain the coolant first to prevent the
coolant from entering the crankcase.
3. Since the boiling point of antifreeze is higher than pure water, the radiator cover must not be opened when the
engine is running normally or the temperature does not drop (60℃) after stopping to avoid burns.
[How to add]
1. Park the motorcycle with a single support on a flat ground and wait for the
engine to cool; otherwise the heat may cause burns to the skin;
2. Unscrew the water tank cover;
3. Pour the cooling liquid from the mouth of the water tank, and add the cooling
liquid to the position of the upper scale line;
4. Close the water tank cover.
68