Idiomas disponibles
Idiomas disponibles
10.2 Check the brake pads of the rear brake
Figure 29 Inspection of rear brake friction lining
Note:
The friction lining will gradually wear out during the braking process of the vehicle. The braking effect will
gradually decrease. To ensure the safety of you and the vehicle, please check it frequently and replace it in time. If
you do not understand the specifications of the friction plate or cannot replace it by yourself, please go to the
designated after-sales point for repair.
10.3. Check the brake fluid level of the rear brake system
Figure 30 Rear brake fluid level check
Check the minimum thickness of the brake pads (A).
The minimum thickness of the brake friction pad: A=1.5mm.
If the thickness is lower than the minimum thickness: please
replace the friction plate in time.
If the friction plate is found to be damaged or cracked: please
replace the friction plate in time
Adjust the placement posture of the vehicle so that the brake fluid in
the brake fluid is in a horizontal position, and check the brake fluid
level through the fluid level window.
When the brake fluid level is below the scale line: please replenish the
brake fluid in time.
62
