Warning:
1. It is strictly forbidden to shift gears when the throttle is not returned and the clutch handle is not held tightly,
otherwise it will easily cause damage to the engine and transmission system and cause safety accidents.
2. When shifting gears, please make sure that the shift lever has been stepped on, and then release the clutch handle.
3. While the clutch handle is held tightly during gear shifting, the clutch is disengaged and the motorcycle runs by
inertia. Therefore, the shifting time should be shortened as much as possible.
4. When the gear is suddenly lowered or the throttle is suddenly returned when driving at high speed, the engine speed
is lower and the rear wheel speed is higher. When the clutch handle is released, the clutch plate frictionally engages
and decelerates, causing the rear wheel to brake, losing control and causing an accident. Therefore, the brakes must be
used to slow down when changing from high-speed driving to low-speed driving, and then lower the gear.
5. It is strictly forbidden to use the low gear to drive at high speed, and it is strictly forbidden to use the high gear to
drive at low speed, otherwise the engine will be damaged.
6. The high gear must be increased before acceleration to make the engine run within the normal speed range. No gear
can make the engine speed too high.
the motorcycle run smoothly in the second gear.
3) ②The method of shifting ③, ④, ⑤, ⑥ is the same as
① shifting ②.
4) The method of lowering the gear is the same as the method
of shifting in neutral ①.
35