Idiomas disponibles
Idiomas disponibles
9.1. Check the front brake disc
Figure 24 Front brake disc inspection
Brake disc wear limit
Front
3mm
Rear
3mm
Warning:
The wear of the brake disc will reduce the thickness of the brake disc within the contact surface of the brake friction
lining, which will reduce the braking effect and threaten your driving safety. Once damage, cracks, or deformation
occur, please replace the brake disc immediately.
When the brake disc is worn to the limit thickness of 3mm, it must be replaced; remove the front brake caliper and
front wheel, and then replace the brake disc.
The brake disc will gradually wear out during long-term use, so it is necessary to
check the thickness of the brake disc at multiple positions of the brake disc. And
check its appearance to confirm whether the brake disc is damaged, cracked or
deformed.
If the thickness of the brake disc is lower than the specified value: please replace
the brake disc.
If the brake disc is damaged, cracked or deformed: please replace the brake disc
图 25 前制动摩擦片检
查
57
