Idiomas disponibles
Idiomas disponibles
Freezer Compartment
Light (on some models)
1.
2.
Unplug
the refrigerator
or disconnect
power.
Remove
the light shield
(on some models).
•
Top of the freezer
compartment
- Slide
the light shield
toward
the back of the compartment
to release
it from
the light assembly.
3. Replace the burned-out
bulb with an appliance
bulb(s) no
greater than 25 watts.
4. Replace the light shield.
5. Plug in refrigerator
or reconnect power.
If the power
will be out for 24 hours or less, keep the door or
doors
closed
(depending
on your
model)
to help food
stay cold
and frozen.
If the power
will be out for more than
24 hours, do one of the
following:
•
Remove
all frozen
food
and store
it in a frozen
food
locker.
Place 2 Ibs (907 g) of dry ice in the freezer for every cubic
foot (28 L) of freezer space. This will keep the food frozen
for 2 to 4 days.
If neither
a food
locker
nor dry ice is available,
consume
or
can perishable
food
at once.
REMEMBER: A full freezer stays cold longer than a partially
filled one. A freezer full of meat stays cold longer than a freezer
full of baked goods. If you see that food contains ice crystals, it
may be refrozen, although the quality and flavor may be
affected.
If the condition of the food is poor, dispose of it.
Vacations
If You Choose
to Leave
the Refrigerator
On
While
You're
Away:
1.
Use up any
perishables
and freeze
other
items.
2.
If your
refrigerator
has an automatic
ice maker,
and is
connected
to the household
water
supply,
turn off the water
supply
to the refrigerator.
Property
damage
can occur
if the
water
supply
is not turned
off.
3.
If you have an automatic
ice maker,
turn off the ice maker.
NOTE:
Depending
on your
model,
raise the wire shutoff
arm
to OFF (up) position,
or press the switch
to OFF.
4.
Empty
the ice bin.
If You Choose to Turn Off the Refrigerator
Before You
Leave:
1. Remove all food from the refrigerator.
2.
If your refrigerator
has an automatic
ice maker:
•
Turn off the water supply to the ice maker at least one
day ahead of time.
•
When the last load of ice drops, raise the wire shutoff
arm to the OFF (up) position or press the switch to OFF,
depending
on your model.
3. Turn off the Temperature control(s). See "Using the
Control(s)."
4. Clean refrigerator,
wipe it, and dry well.
5. Tape rubber or wood blocks to the tops of both doors to
prop them open far enough for air to get in. This stops odor
and mold from building
up.
Moving
When you are moving your refrigerator
to a new home, follow
these steps to prepare it for the move.
1.
If your refrigerator
has an automatic
ice maker:
•
Turn off the water supply to the ice maker at least one
day ahead of time.
•
Disconnect the water line from the back of the
refrigerator.
•
When the last load of ice drops, raise the wire shutoff
arm to the OFF (up) position or press the switch to OFF,
depending
on your model.
2. Remove all food from the refrigerator
and pack all frozen
food in dry ice.
3. Empty the ice bin.
4. Turn off the Temperature control(s). See "Using the
Control(s)."
5. Unplug refrigerator.
6. Clean, wipe, and dry thoroughly.
7. Take out all removable
parts, wrap them well, and tape
them together so they don't shift and rattle during the move.
8. Depending on the model, raise the front of the refrigerator
so it rolls more easily OR raise the leveling screws so they
don't scrape the floor. See "Adjust the Door(s)" or "Door
Closing and Door Alignment."
9. Tape the doors closed and tape the power cord to the back
of the refrigerator.
When you get to your new home, put everything back and refer
to the "Installation
Instructions" section for preparation
instructions. Also, if your refrigerator
has an automatic
ice
maker, remember to reconnect the water supply to the
refrigerator.
22
