Idiomas disponibles
Idiomas disponibles
Push the base grille in toward the refrigerator
until it is
firmly in place.
A
B
NOTE: If water flow to your water dispenser or ice maker
decreases noticeably, change the filter sooner. The
disposable water filter should be replaced at least every
6 months, depending
on your water quality and usage.
After changing
the water filter, reset the status. Press and
hold the WATER FILTER button for 3 seconds. When the
system is reset, the water filter icon will return to its BLUE
color and the words "Replace Filter" will disappear from the
display.
Changing the Water
Filter
A. Tab
B. Clip
Door Alignment
If the space between the refrigerator
doors and freezer drawer
looks uneven, you can adjust it using the following
instructions:
1. Remove the top hinge cover.
2. Loosen the top hinge screws using a 5A6" socket or wrench.
3. Have someone hold the door in place or put a spacer
between the doors and drawer.
4. Tighten the top hinge screws once the door is in the desired
location.
5.
Replace
the top hinge
cover.
FILTERSAND ACCESSORIES
Do not use with water that is microbiologically
unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected waters that may contain
filterable cysts.
Water
Filter Status Light
The water filter status light on the control panel will help you
know when to order and replace the water filter.
•
GOOD
- The water filter icon on the control lights up in
BLUE.
ORDER a replacement
filter - The water filter icon on the
control lights up in YELLOW.
REPLACE the water
filter
- The water
filter
icon on the
control
lights
up in RED and "Replace
Filter"
will appear
on
the display.
EXPIRED - The water filter icon lights up in RED and
"Replace Filter" flashes on the display.
1.
Locate
the water
filter
in the top-right
corner
of the
refrigerator
compartment.
2.
Lift open
the filter
cover
door. The filter
will be released
and
then eject as the door
is opened.
3.
When
the door
is completely
open,
pull the filter
straight
out.
4.
NOTE: There may be some water in the filter. Some spilling
may occur. Use a towel to wipe up any spills.
Take the new filter out of its packaging
and remove the
covers from the O-rings. Be sure the O-rings are still in place
after the covers are removed.
5. With the arrow pointing up, align the new filter with the
filter housing and slide it into place. The filter cover door will
automatically
begin to close as the new filter is inserted.
6. Close the filter cover door completely
in order to snap the
filter into place. You may need to press hard.
7. Flush the water system. See "Water
Dispenser" or "Water
and Ice Dispensers."
The air filter reduces the buildup of odors. This helps to maintain
a cleaner environment inside the refrigerator.
On some models, your refrigerator's
accessory packet includes
an air filter, which must be installed prior to use. On some
models, the air filter is already
installed at the factory.
13
