Kenmore 106.7947 Serie Manual De Uso Y Cuidado página 17

Refrigerador con congelador en la parte inferior
Idiomas disponibles

Idiomas disponibles

To turn cooling
back
on, press and hold
both
the MAX
COOL
and MOISTURE
CONTROL
buttons,
at the same time,
for 3 seconds.
When
cooling
is on, "Cooling
Off"
will
disappear
and the previously
selected
settings
will appear
on the display
screen.
Additional Features
Max Cool
The Max
Cool feature
assists during
times of high refrigerator
use, full grocery
loads or temporarily
warm
room temperatures.
Press MAX
COOL
to set the freezer
and refrigerator
to the
coldest
temperature
settings.
Press MAX
COOL
again
to
return
to the selected
temperature
set point.
NOTES:
The Max Cool icon will be illuminated
while the
refrigerator
is in Max Cool mode. The displayed
compartment
temperature
settings will not change.
The Max Cool feature will turn off automatically
after
24 hours.
Moisture
Control
The moisture control feature
turns on a heater
to help
reduce
moisture
on the door
hinge
seal. Use in humid
environments
or
when you notice moisture
on the door
hinge
seal. The
refrigerator
uses more energy
when Moisture
Control is on.
To turn on the Moisture
Control
feature,
press and hold
MOISTURE
CONTROL
for 3 seconds.
To turn off the Moisture Control feature, press and hold
MOISTURE CONTROL for 3 seconds.
Door
Open
Alarm
The Door Open
icon lights
up when a door
has been open
for 5 minutes
and cooling
is on. An alert
tone
will sound
three times, and the Door Open
icon will flash seven times.
This pattern
will repeat
every
2 minutes
until all the doors
are closed
completely.
The feature
then resets and will
reactivate
when a door
is left open
again
for 5 minutes.
NOTES:
To mute the audible
alarm
while
keeping
the doors
open,
such as while
cleaning
the inside of the refrigerator,
press any
button
on the control
panel.
The alarm
sound
will be temporarily
turned
off, but the Door Open
icon
will still be displayed
on the dispenser
control
panel.
All doors
must be completely
closed
to turn off the Door
Open
icon.
Sabbath
Mode
Sabbath mode is designed for those whose religious
observances require turning off the lights.
In Sabbath Mode the temperature
set points remain unchanged,
but the interior and dispenser lights turn off, all sounds and
alarms are disabled and the dispenser screen backlight
turns
off.
To turn on Sabbath
Mode,
press and hold
both
FREEZER
TEMP and FRIDGE
TEMP at the same time for 3 seconds.
After
3 seconds,
an "engage"
tone
will sound and the icons
on the control
panel
display
will flash
and then disappear.
NOTE: You must close the doors to turn off the lights. The
lights will remain off while the refrigerator
is in Sabbath
mode.
To turn off Sabbath
Mode,
press and hold
both
FREEZER
TEMP and FRIDGE
TEMP at the same time for 3 seconds.
After
3 seconds,
an "disengage"
tone
will sound and the
control
panel
will display
the normal
screen.
NOTE: After turning off Sabbath Mode, you must first close
the doors to turn ON the lights. Then the lights will function
normally.
NOTES:
Sabbath
mode
does
not disable
the water
dispenser
or the
ice maker.
To turn off the ice maker,
see "Ice Maker."
If a power
failure
occurs
or you unplug
the refrigerator
while
it is in Sabbath
mode,
it will take
10 minutes
for the cooling
system
to resume
when
power
is restored.
Water
Filter Status
Light and
Reset
The filter
reset control allows
you to restart the water filter
status
tracking
feature
each time you replace
the water
filter.
See
"Water
Filtration
System."
Press and hold WATER
FILTER for 3 seconds,
to reset the
water
filter
status to Good.
The Water
Filter
icon will turn
blue.
Air
Filter Status
Light and
Reset
The filter
reset control
allows
you to restart the air filter
status
tracking
feature
each time you replace
the air filter.
See "Install
Air Filter."
Press and hold AIR FILTERfor 3 seconds, to reset the air filter
status to Good. The Air Filter icon will turn blue.
17
loading