Idiomas disponibles
Idiomas disponibles
H_s t%Mei_gh_ B_s_
To remove
and
replace
the
half-height
bin:
1.
Tilt the
bin by grabbing
it and
pulling
outward.
2.
Remove
the bin by grabbing
it and lifting
it upward
off the
glides.
3.
Replace
the bin by sliding
it back
onto the glides
and then
push it closed.
REFRIGERATOR CARE
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Both the refrigerator
and freezer sections defrost automatically.
However, clean both sections about once a month to avoid
buildup of odors. Wipe up spills immediately.
IMPORTANT:
Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thoroughly
clean both sections to eliminate odors. To avoid
odor transfer and drying out of food, wrap or cover foods
tightly.
For stainless steel models, stainless steel is corrosion-resistant
and not corrosion-proof.
To help avoid corrosion of your
stainless steel, keep your surfaces clean by using the
following
cleaning instructions.
To Clean
Your
Refrigeraton
NOTE:
Do not use abrasive
or harsh
cleaners
such as window
sprays,
scouring
cleansers,
flammable
fluids,
muriatic
acid,
cleaning
waxes,
concentrated
detergents,
bleaches
or cleansers
containing
petroleum
products
on exterior
surfaces
(doors
and
cabinet),
plastic
parts,
interior
and door
liners or gaskets.
Do not
use paper
towels,
scouring
pads, or other
harsh
cleaning
tools.
1.
Unplug
refrigerator
or disconnect
power.
2.
Hand
wash,
rinse, and dry removable
parts
and interior
surfaces
thoroughly.
Use a clean
sponge
or soft cloth
and a
mild detergent
in warm
water.
3.
Clean
the exterior
surfaces.
4°
Painted metal: Wash painted metal exteriors with a clean,
soft cloth or sponge and a mild detergent in warm water.
Rinse surfaces with clean, warm water and dry immediately
to avoid water spots.
Stainless steel: Wash stainless steel surfaces with a clean,
soft cloth or sponge and a mild detergent in warm water.
Rinse surfaces with clean, warm water and dry immediately
to avoid water spots.
NOTE: When cleaning stainless steel, always wipe in the
direction of the grain to avoid cross-grain scratching.
There is no need for routine condenser cleaning in normal
home operating
environments.
If the environment is
particularly
greasy or dusty, or there is significant
pet traffic
in the home, the condenser should be cleaned every 2 to
3 months to ensure maximum efficiency.
If you need to clean the condenser:
•
Remove the base grille.
•
Use a vacuum cleaner with a soft brush to clean the
grille, the open areas behind the grille and the front
surface area of the condenser.
•
Replace the base grille when finished.
5. Plug in refrigerator
or reconnect power.
IMPORTANT:
•
Not all appliance
bulbs will fit your
refrigerator.
Be sure to
replace
the bulb
with
an appliance
bulb of the same size,
shape
and wattage.
•
To ensure
optimum
refrigerator
performance,
replace
light
bulbs as soon as they
burn out.
Refrigerator
Compartment
Light
The lighting located at the top of the refrigerator
compartment
never needs to be replaced. If the lights do not illuminate when
the door is opened, call for assistance or service. In the U.S.A.,
call 1-800-253-1301.
In Canada, call 1-800-807-6777.
21
