Kenmore 106.7947 Serie Manual De Uso Y Cuidado página 16

Refrigerador con congelador en la parte inferior
Idiomas disponibles

Idiomas disponibles

IMPORTANT:
l =ols
Wait
24 hours for your
refrigerator
to cool completely
before
adding
food.
If you add food
before
the refrigerator
has cooled
completely,
your
food
may
spoil.
NOTE: Adjusting the refrigerator
and freezer temperature
controls to a colder than recommended
setting will not cool
the compartments
any faster.
The recommended
setting should be correct for normal
household refrigerator
use. The controls are set correctly
when milk or juice is as cold as you like and when ice cream
is firm.
NOTE: Areas such as a garage or porch, may experience
warmer or colder temperatures
and higher humidity than
inside the home. You may need to adjust the temperature
away from the recommended
set points to accommodate
for these conditions.
If the temperature
is too warm
or too cold in the refrigerator
or freezer,
before
adjusting
the controls,
first check
the air
vents located
in the refrigerator
and freezer
compartments
to be sure they are not blocked
by food
items.
Control Panel
The control
panel
is located
inside
the refrigerator
compartment.
This control
operates
both
the refrigerator
and
freezer
compartments.
Cooling
Reptace Filter
Off
Replace
Filter
>Colder
_
Colder
• "-"
Q
I!I "'"
Freezer
Temp
Air
Filter
Max
Cool
Moisture
Control
Water
Filter
Fridge
Temp
The control panel will display the Home Screen, as shown, when
either refrigerator
door is opened.
Colder
J_ Colder
Freezer
Temp
Air Filter
Max
Cool
Moisture
Control
Water
Filter
Fridge
Temp
Temperature Control
For your convenience, the temperature
control is preset at the
factory. When you first install your refrigerator,
make sure the
control is still set to the recommended
setting as shown.
Recommended
Setting (3 lit boxes)
Colder
J_ Colder
Freezer
Temp
Air
Filter
Max
Coot
Moisture
Control
Water
Filter
Fridge
Temp
Adjusting the Temperature
If you need to adjust the temperature in either the refrigerator
or freezer compartment, use the settings listed in the following
chart as a guide.
Press either the FREEZERTEMP or FRIDGE TEMP button to
select the desired temperature
setting from (1 box [least
cold] to 5 boxes [coldest]).
NOTE: Except when starting the refrigerator,
do not adjust the
control more than one setting at a time. Wait 24 hours between
adjustments for the temperature
to stabilize.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
FRIDGE TEMP one
setting (box) more
FREEZERtoo warm/too
little ice
FREEZERTEMP one
setting (box) more
REFRIGERATOR too cold
FRIDGE TEMP one
setting (box) less
FREEZERtoo cold
FREEZERTEMP one
setting (box) less
Cooling Off/On
Your refrigerator
and freezer will not cool and water will not
dispense when cooling is turned off.
To turn cooling off, press and hold both the MAX COOL and
MOISTURE CONTROL buttons, at the same time, for
3 seconds. When cooling is off, "Cooling Off"
will appear
on the display screen.
16
loading