Idiomas disponibles
Idiomas disponibles
CHECKING THE TIRE PRESSURE
1 1 2 2 2
Install the rear wheel in the swing arm and install
the axle (grease the axle prior to installation)
Mount the chain.
Install the chain tensioner
2
but do not tighten.
Check the chain tension (
2
Tighten the nut
.
Rear Axle nut
Operate the rear brake pedal several times until
the pads touch the disk.
Remove the bike from the stand.
Regularly check the tire pressure with a precision
pressure gauge.
- Remove the valve cap.
- Check air pressure when the tire is cold.
Tire air pressure when used in rough terrain.
Front
Rear
If the pressure does not comply with the above
table :
- Correct the pressure.
- Replace the valve cap.
1
and install the nut
p.105)
☛
M24
100Nm
0,9bar (13 psi)
0,9bar (13 psi)
111
