Safety Devices On The Product - Husqvarna T540XP Mark III Manual Del Usuario

Ocultar thumbs Ver también para T540XP Mark III:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Safety devices on the product

WARNING:
instructions that follow before you use the
product.
Do not use a product with safety devices that are
damaged or do not operate correctly.
Do a check of the safety devices regularly. Refer to
Maintenance and checks of the safety devices on
the product on page 20 .
If the safety devices are damaged or do not operate
correctly, speak to your Husqvarna servicing dealer.
Chain brake and front hand guard
Your product has a chain brake that stops the saw chain
if you get a kickback. The chain brake decreases the
risk of accidents, but only you can prevent them.
The chain brake (A) engages manually by your left hand
or automatically by the inertia release mechanism. Push
the front hand guard (B) forward to engage the chain
brake manually.
B
A
Pull the front hand guard rearward to disengage the
chain brake.
Throttle trigger lockout
The throttle trigger lockout prevents accidental operation
of the throttle trigger. If you put your hand around
the handle and press the throttle trigger lockout (A),
it releases the throttle trigger (B). If you release the
handle, the throttle trigger and the throttle trigger lockout
move back to their initial positions. This function locks
the throttle trigger at idle speed.
8
Read the warning
B
A
Chain catcher
The chain catcher catches the saw chain if it breaks or
derails. Correct saw chain tension and correctly applied
maintenance on the saw chain and guide bar, decrease
the risk of accidents.
Vibration damping system
The vibration damping system decreases vibration in
the handles. Vibration damping units operate as a
separation between the product body and the handle
unit.
Product overview on page 3 for information
Refer to
about where the vibration damping system is on your
product.
Start/stop switch
Use the start/stop switch to stop the engine.
Muffler
WARNING:
hot during/after operation and at idle speed.
There is a risk of fire, especially when
you operate the product near flammable
materials and/or fumes.
B
The muffler becomes very
1792 - 007 -
Tabla de contenido

Solución de problemas

loading

Tabla de contenido