Idiomas disponibles
Idiomas disponibles
31. Air filter
32. Spark plug cap
33. Spark plug
34. Vibration element
35. Muffler and spark arrester screen
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Stop.
Chain brake, engaged (right). Chain
brake, disengaged (left).
Air purge bulb.
Adjustment of the oil pump.
Fuel.
Chain oil.
Both of the operator's hands must be used
to operate the chainsaw.
Never operate the chainsaw holding it with
one hand only.
4
Never let the guide bar tip come in contact
with any object.
Warning! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
XX
Computed kickback bar stopping angle
without actuated chainbrake, CKA wob.
XX
Computed kickback bar stopping angle
with actuated chainbrake, CKA wb.
Husqvarna SP21G
14
Max 8T
yyyywwxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for certain markets.
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown
to meet Federal emissions requirement. Maintenance,
replacement or repair of the emission control devices
and system may be performed by any nonroad engine
repair establishment or individual.
Recommended cutting
equipment in this exam-
ple: Guide bar length 14
in, maximum nose radius
8 Teeth and chain type
Husqvarna SP21G.
The rating plate or the la-
ser printing shows the se-
rial number. yyyy is the
production year and ww is
the production week.
1792 - 007 -
