DeWalt D55154 Manual De Instrucciones página 4

Definitions: Safety Guidelirees
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
.&DANGER: Indicates an imminently hazardous
s#uation which, if not avoided, will result in death
or serious injury.
.&WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
.&CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert .symbol
indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
Irnportant Safety Instructions
.& WARNING: Do not operate this unit until you read and understand
this instruction manual for safety, operation and maintenance
instructions.
A WARNING: Some dust created by power sanding, sawing, grind-
ing, drilling, and other construction activities contains chemicals
known to the State of California to cause cancer, birth defects or other
reproductive harm. Some example of these chemicals are:
• lead from lead-based paints
• crystalline silica from bricks and cement and other masonry
products
arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a weft ventilated area, and work with approved safety
equipment, always wear OSHA/MSHA/NIOSH approved, properly
fitting face mask or respirator when using such tools.
When using air tools, basic safety precautions should always be fol-
lowed to reduce the risk of of personal injury
i_WARNING: This product contains chemicals, including lead,
known to the State of California to cause cancer, and birth defects
or other reproductive harm. Wash hands after handling.
SAVE THESE INSTRUCTION
.&DANGER: RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN HOWTO PREVENT iT
iS normal for electrical • Always operate the corn'
contacts within the m0tQr pressor in a well ventilated
and pressure switch to area free of combustible
spark, materials, gasoline, or sol_
vent vapors.
• If electrical sparks from • If spraying flammable mate-
compressor come into rials, locate compressor at
contact with flammable least 20 feet (6.1 m) away
vapors, they may ignite, from spray area. An addi-
causing fire or explosion, tional length of hose may be
required.
• Store flammable materials in
a secure location away from
compressor.