Scheppach Compact 15t Traduccion Del Manual De Instrucciones Originale página 42

* The maximum achievable splitting force is dependent
on the resistance of the log and can differ due to varia-
ble contributing factors on the hydraulic system.
** Operating mode S6 40%, uninterrupted periodic op-
eration with intermittent load. The mode comprises of
a start-up period, a time with constant load and an idle
time. The operating time is 10 mins, the relative duty
cycle is 40% of the operating time.
Noise
The noise levels have been determined in accordance
with EN 62841.
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
WA
Uncertainty K
WA
Wear hearing protection.
Excessive noise can result in a loss of hearing.
The specified noise emission values have been meas-
ured in accordance with a standardised test procedure
and can be used to compare one power tool with an-
other.
The specified device emissions values can also be
used for an initial estimation of the load.
Warning:
• The noise emission values can vary from the spec-
ified values during the actual use of the power tool,
depending on the type and the manner in which the
power tool is used, and in particular the type of work-
piece being processed.
• Try to keep the stress as low as possible. For exam-
ple: Limit working time. In doing so, all parts of the
operating cycle must be taken into account (such as
times in which the power tool is switched off or times
in which it is switched on, but is not running under
a load).
8. Unpacking
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
42 | GB
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
89.6 dB
3 dB
m WARNING!
102.6 dB
Danger of choking and suffocating!
The packaging material, packaging and transport safe-
3 dB
ty devices are not children's toys. Plastic bags, foils
and small parts can be swallowed and lead to choking.
- Keep packaging material, packaging and transport
safety devices away from children.
9. Layout
Your log splitter is not completely assembled for pack-
aging reasons.
Note
Due to the heavy weight of the product, we recom-
mend installation by at least two people.
You require the following for assembly:
• 2x open-ended spanner / socket spanner, size
13mm
• 2x open-ended spanner / socket spanner, size
16mm
• 2x open-ended spanner / socket spanner, size
19mm
• 1x wooden base
• 1x soft-face hammer
• 1x socket spanner attachment 32mm
• 1x 8mm Allen key
• Grease or spray oil
Not included in the scope of delivery.
www.scheppach.com