Scheppach Compact 15t Traduccion Del Manual De Instrucciones Originale página 41

Service
• Only have your electric tool repaired by quali-
fied specialists and only with original spare
parts. This will ensure that the safety of the power
tool is maintained.
6. Additional safety instructions
• The log splitter may only be operated by a single
person.
• Never split trunks that contain nails, wire, or other
objects.
• Wood that has already been split and wood chip-
pings create a hazardous work area. There is a
danger of tripping, slipping or falling. Always keep
the work area orderly.
• Never place your hands on moving parts of the ma-
chine when it is switched on.
• Only split wood with a maximum length of 107 cm.
m Warning! This power tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain cir-
cumstances. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operating
the power tool.
Residual risks
The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Danger of injury for fingers and hands from the split-
ting tool in the event of improper guiding or support
of the wood.
• Injuries due to the workpiece being ejected at high
speed due to improper holding or guiding.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Switch off the device and pull out the mains plug be-
fore carrying out any setting or maintenance work.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this operating manual.
• This is how to ensure that your machine provides
optimum performance.
• Keep your hands away from the working area when
the machine is in operation.
7. Technical data
Dimensions DxWxH mm
Swivel table height mm
Working height mm
Min./max. wood length
cm
Max. power t*
Hydraulic pressure MPa
Cylinder stroke cm
Feed speed cm/s
Return speed cm/s
Oil quantity l
Min./max. wood diameter
cm
Weight kg
Drive
Motor V/Hz
Rated input P1 kW
Power output P2 kW
Input current A
Short-circuit resistance
kA
Operating mode
Speed 1/min
Motor protection
Phase inverter
Subject to technical changes!
www.scheppach.com
1160x960x1100 / 1650
320
920
75 / 107
15
26,7
55,0
3,8
12,8
7
12 – 45
191
400/50
3,5
2,5
7,1
1
S6/40% / IP54
2800
Yes
Yes
GB | 41