Technical Data; Symbols; Functional Description; Use For Intended Purpose - Festool OF 2200 EB Manual De Instrucciones

8

Technical data

Power
Voltage
No load speed
Quick height adjustment
Fine height adjustment
Router diameter, max.
Drive shaft connection of the spindle
Weight
Protection class

Symbols

V Volts
A Amperes
Hz Hertz
~ Alternating current
n No load speed
0
Class II Construction
rpm Revolutions or reciprocation per minute
Ø Diameter
Warning of general danger
Read the Operating Instructions/Notes!
Wear a dust mask.
Wear protective goggles!

Advice or tip

Functional description

The pictures for the functional description are on
a fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
1.1 Adjusting wheel for fi ne routing depth
adjustment
1.2 Dial ring for fi ne routing depth adjustment
1.3 Rotary knob for fi xing routing depth
1.4 Scale for routing depth
1.5 Depth stop with indicator
1.6 Clamp lever for depth stop
15 A
~ 120 V, 60 Hz
10000 - 22000 rpm
80 mm (3.1")
20 mm (0.8")
89 mm (3.5")
M 22x1
7.8 kg (17.2 lbs)
/ II
1.7 Eccenter for connecting depth stop and
stepped stop
1.8 Stepped stop
1.9 Lever for changing base runner
1.10 Rocker switch for spindle lock
1.11 Adjusting wheel for speed control
2.1 Locking knob for on/off switch
2.2 On/off switch
2.3 Lever for locking protective guard
2.4 Handles
2.5 Extractor connector

Use for intended purpose

The routers are designed for routing wood, plastics
and similar materials. Aluminium and plasterboard
can also be processed with corresponding cutters
such as are listed in the Festool catalogues.
Festool electric power tools should
only be installed in work benches specially de-
signed by Festool. The electric power tool may
become unsafe and cause serious accident if in-
stalled in benches from other manufacturers or
self-manufactured work benches.
The user is liable for damages and
injuries due to incorrect usage.

Electrical connection

The network voltage must conform to the voltage
indicated on the rating plate. A 16 A safety fuse (for
120 V) or a corresponding protective circuit-breaker
is required.
Extension cable
If an extension cable is required, it must have a suf-
fi cient cross-section so as to prevent an excessive
drop in voltage or overheating. An excessive drop in
voltage reduces the output and can lead to failure
of the motor. The table below shows you the correct
cable diameter as a function of the cable length for
the router OF 2200 EB. Use only U.L. and CSA listed
extension cables. Never use two extension cables
together. Instead, use one long one.
Total Extension Cord
Lenght (feed)
Cord size (AWG)
25 50 100 150
16 14 12 10