Machine-Related Safety Instructions; Technical Data - Festool DOMINO XL DF 700 EQ Manual De Instrucciones

operations different from those intended could
result in a hazardous situation.
h) Keep handles dry, clean and free from oil and
grease. Slippery handles do not allow for safe han-
dling and control of the tool in unexpected situa-
tions.
5 SERVICE
a) Have your power tool serviced by a qualified re-
pair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.

Machine-related safety instructions

– The tools must be rated for at least the speed
marked on the power tool. Tools running over
rated speed can fly apart and cause injury.
– Always use the guard. The guard protects the
operator from broken tool fragments and unin-
tentional contact with the tool.
– Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
– Keep hands away from the cutting area. Never
place your hand on the front face of the fence
while the tool is running.
– Only cutters provided by Festool for this pur-
pose may be mounted on the power tool. The
use of other cutters is prohibited due to the in-
creased risk of injury.
– Never use dull or damaged mortising bits. Dull
or damaged mortising bits can cause the tool to
lurch sideways unexpectedly and lead to a loss of
control of the power tool.
– Do not resharpen cutters more than twice. Re-
sharpened cutters may affect the precision of the
cutting results.
Joiner
Power
Speed (no load) n
0
Routing depth
Routing width, max.
Ø cutter, max.
Connecting thread of the drive shaft
Weight (excluding cable)
Safety class
8
All manuals and user guides at all-guides.com

Technical data

– Do not operate the tool if the spring-loaded fence
does not return to its forward rest position. The
fence covers the mortising bit and prevents acci-
dental contact. If the slides of the fence do not
move freely, have the tool serviced immediately.
– Wait until the power tool stops completely until
placing it down. The tool can become entangled
and lead to a loss of control of the power tool.
Health hazard by dust
WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemicallytreated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
DF 700 EQ
720 W
21000 rpm
15 - 70 mm
16,5 mm + Ø cutter
14 mm
M8 x 1
5,2 kg
/II