Original Operating Manual 1 Symbols; Technical Data; Intended Use; General Safety Instructions - Festool KF 5 EBQ Manual De Instrucciones Original/Lista De Piezas De Repuesto

KF 5 EBQ
GB
Original operating manual
1 Symbols................................................ 12
2 Technical data ...................................... 12
3 Intended use ........................................ 12
4 Safety instructions ............................... 12
5 Operation.............................................. 13
6 Settings ................................................ 13
7 Electronics ........................................... 14
8 Dust extraction..................................... 15
9 Working with the machine ................... 15
10 Service and maintenance .................... 15
11 Accessories .......................................... 15
12 Environment......................................... 16
13 Warranty............................................... 16
14 EU Declaration of Conformity.............. 16
The specified illustrations appear at the beginning
of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective goggles.
Wear a dust mask.
Wear protective gloves.
Do not throw in the household waste.
2

Technical data

Putty Cutter
Power
Speed (no load) n
0
Quick height adjustment
Fine height adjustment
12
Putty Cutter
Connecting thread of the drive
shaft
Ø cutter, max.
Weight (excluding cable)
Safety class
3
The KF 5 EBQ putty cutter is designed for puttying
windows and routing wood, plastics and similar
materials. Aluminium and plasterboard can also be
processed if used with the corresponding cutters as
specified in the Festool catalogues.
4
4.1
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
4.2
- Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
- The tools must be rated for at least the speed
marked on the power tool. Tools running over
rated speed can fly apart and cause injury.
- The clamping collet should only be used to clamp
tools with a shank diameter appropriate for the
collet.
- Check that the cutter is firmly fitted and runs
freely.
- The clamping collet and union nut must show no
signs of damage.
KF 5 EBQ
- Never use dull or damaged mortising bits. Dull
1010 W
or damaged mortising bits can cause the tool to
lurch sideways unexpectedly and lead to a loss of
10000 - 24000
control of the power tool.
rpm
55 mm
8 mm

Intended use

The user is liable for improper or non-in-
tended use.
Safety instructions

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
Machine-related safety instructions
KF 5 EBQ
M16x1,5
30 mm
3,1 kg
/II