Password [Print]; Password Set-Up - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790 / MP

3.12 Password [PRINT]

Blocks access to stamping with a password and protects it against misuse.
The factory-set password is 2468.
Proceed as in Menu access (see page 37).
Press [NEXT] until "PASSW PRINT" appears.

Press [VARY].

To activate the password input, press [ON].

Password input is active.
To modify the password, press [RETURN] once

(see "Password Set-up" on page 62).
– or –
In order to deactivate password input, enter the defined password.

To confirm the password, press [RETURN] once.

Password input can now be deactivated.
To deactivate password input, press [OFF].

To save changes and to return to the main menu,

press [RETURN] three times.
The main menu appears.

3.13 Password Set-up

Proceed as in Menu access (see page 37).
Setting one of the passwords to [ON].

Press [RETURN].

To increase the number value, press [INC].

To decrease the number value, press [DEC].

To move one character to the right and to change it with [INC/DEC], press [RIGHT].

To save changes and to return to the main menu,

press [RETURN] three times.
The main menu appears.
62