Using The Jetstamp 790 - Normal Operation; Changing Ink Cartridge; Cleaning Ink Cartridge; Selecting Cleaning Interval - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790 / MP
2. Using the jetStamp 790 – Normal operation

2.1 Changing ink cartridge

Changing ink cartridge
Remove the jetStamp 790 from the charging station

Press [MODE] until [INKJET] appears in the menu line.

Press [INKJET].

The print carriage moves into a central position.
Push the locking rail

Take the old ink cartridge out of the print carriage.

Take the new ink cartridge

from the jets .

Hold the small felt pad

until some ink appears on the felt.
Holding the ink cartridge handle

Pull the locking bar

Press [INKJET].

The print carriage moves to the stamping position.

2.2 Cleaning ink cartridge

Place the jetStamp 790 in the charging station.

Press [MODE] until [CLEAN] appears in the menu line.

To start the cleaning process, press [CLEAN].


2.3 Selecting cleaning interval

See "Cleaning interval" on page 57.

 Fig. C + F
as far back as it will go.

from its packaging and remove the protective film

that is provided, against the ink cartridge jets

, insert the ink cartridge

forward again until it locks into place.

.


into the print carriage.


49