Skip Value - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790 / MP
To save changes and to return to the main menu,

press [RETURN] three times.
The main menu appears.
If a second numberer is required, customer-specific imprints in the range from
P: 26 to P: 29 must be selected (see "Selecting imprint" on page 44).
Proceed as in Menu access (see page 37).
Press [NEXT] until "MODE NUM 2" appears.

Proceed using the same process.

2.5.3 Skip value

The skip value defines the interval in which the numberer counts,
e.g. in steps of 3.
Imprint P: 05 to P: 07, P: 11 to P: 14 or P: 20 to P: 25 must be chosen
(see "Selecting imprint" on page 44).
Proceed as in Menu access (see page 37).
Press [NEXT] until "SKIP NUM 1" appears.

Press [VARY].

To increase the number value, press [INC].

To decrease the number value, press [DEC].

Skip value can be set in the range from 01 to 99.
To save changes and to return to the main menu,

press [RETURN] three times.
The main menu appears.
To set the skip value for a second numberer, customer-specific imprints in the range from
P: 26 to P: 29 must be selected (see "Selecting imprint" on page 44).
Proceed as in Menu access (see page 37).
Press [NEXT] until "SKIP NUM 2" appears.

Proceed using the same process.
51