Selecting Language; Stored Imprints; Selecting Imprint - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790 / MP
Push the locking rail

Take the new ink cartridge

from the jets
Hold the small felt pad

ink appears on the felt.
Holding the ink cartridge handle

Pull the locking bar

Press [INKJET].

The print carriage moves to the stamping position.

1.3 Selecting language

See "Selecting language" on page 58.


1.4 Stored imprints

Numbers P: 01 to P: 25 are predefined imprints that contain such print fields as "Pretext",
"Numberer", "Date" and "Time" (see page 47), which have to be adjusted before stamping.
A "Pretext" can be selected from 12 standard texts (see page 47). The contents of the
displayed imprints are just examples and can be changed.
Numbers P: 26 to P: 29 are customer-specific imprints that can be created individually
(see page 55).
The active imprint is shown in the top left of the display, e.g. P: 09.

1.5 Selecting imprint

In order to make adjustments to the imprints, they have to be selected and activated first.
Press [MODE] until [NEXT] appears in the menu line.

Press [NEXT] until the required P: number appears.

Other options for selected imprints:
- Favourites (see Page 54).
- Setup-Module under "STAMP PICTURE" (see page 56).
44
as far back as it will go.

from its packaging and remove the protective film

.

that is provided, against the ink cartridge jets


forward again until it locks into place.

, insert the ink cartridge

until some

into the print carriage.
