Sagi ME70LTR Manual De Uso E Instalación página 129

Remove protective film from product.
This may cause unpleasant static electricity discharge which, however, is not
dangerous.
The inconvenience is reduced or prevented by continuously holding the refrigerator
with one hand or grounding the package.
After having positionned the machine remove the pallet using a chisel and a hammer,
paying attention not to dammage the feet under the blocks or the refrigerator.
Draw the stiffening block from the port under the machine.
Now it is possible to regulate the feet.
Put the appliance at level by keeping it slightly inclined at its back in order to allow the
optimum self-closing door.
Clean with tepid water and neutral soap (as written in the chapter "CLEANING") and
mount the fittings placed into the refrigerator.
The refrigerator is supplied with an electric plug, SCHUKO type. Make sure if complies
with EN60320 and national regulations. Otherwise, replace with a complying one.
WARNING: In order to reduce risks related to flammability, this operation must be
performed by a qualified technician.
Signal warning of flammability due to the presence of flammable refrigerant
(R290 or R600a).
Check that the line voltage corresponds to the one refered on the refrigerator's
identification tag.
Then insert the plug into the current tap.
Now the installation has come to end.
11