Mitsubishi Electric City Multi PLFY-P VBM-E Serie Manual De Instalación página 14

Step 2
1 Press the
button to go through the operation modes in the order of "Cool"
F1
Cool mode: Check the cold air blow off.
* Check the operation of the outdoor unit's fan.
2 Press the
AUTO vane check
1 Check the auto vane with the
F1 F2
2 Press the
button to return to "Test run operation".
3 Press the
button.
14
buttons. (Fig. 6-6)
A Water supply pump
B Water (about 1000 cc)
C Drain plug
D Pour water through outlet
· Be careful not to spray water into
the drain pump mechanism.
Test run Remain
Pipe
Cool Auto
Switch disp.
Mode Fan
F1 F2 F3 F4
·
Pour water during cooling operation and check.
· Pour water during emergency operation and check.
turned on to L and N on terminal block after the connecter (SWE) on controller
board in the electrical branch box is set to ON.
Be sure to turn it back to the former state after work.
Remain
Vane
F1 F2 F3 F4