Before First Use; Initial Cleaning; First Connection; Initial Preheating - IKEA MUTEBO Manual De Instrucciones

ENGLISH

Before first use

Warning! Refer to Safety
chapters.

Initial Cleaning

Step 1
Remove all accessories and
removable shelf supports
from the appliance.

First connection

The display shows welcome message after the first connection.
You have to set: Language, Display brightness, Key tones, Buzzer volume, Water hardness,
Time of day.

Initial preheating

Step 1 Remove all accessories and removable shelf supports from the oven.
Step 2
Set the maximum temperature for the function:
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function:
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is
ventilated.
How to set: Water hardness
When you connect the oven to the mains you have to set the water hardness level.
Use the test paper supplied with the steam set.
Step 1
Step 2
Clean the appliance and the
accessories only with a mi‐
crofibre cloth, warm water
and a mild detergent.
Preheat the empty oven before the first use.
Step 2
Place the accessories and the
removable shelf supports in
the appliance.
.
.
Step 3
91
Step 3
Step 4